Technical specification

3 wires per second

Length of cross wire: L = 2400 mm


This fence-welding machine was developed to make endless fences composed of wire.

The welding machine was installed and is used in indonesia.

The welding machine transports the wire from a coil to an automated cutter, cuts it to the required length and passes it on to the welding machine.

The welding machine welds then these wires together with other vertical wires to a fence

The back-step method transports the cut wire step by step onto the required place.

Ther the connection points are welded together and a theoretical endless Grid is produced


Niederberger Engineering erstellte Konzept und 3D-Modell für diese Anlage.

Glossar | Disclaimer | Sitemap